Features Of Pressure Lubrication Technology For Outboard Motors

There are many common ways for outboard motor manufacturers to lubricate outboard motors, and pressure lubrication is one of them. So, what are the characteristics of this technology? Let's take a look at what the relevant people have to say.
(1) Improve the lubrication effect: pressure lubrication makes the softening powder coating effect better, reduces mold wear, reduces the impact of mold replacement on operating efficiency, and improves production; reduces friction and heat, and avoids lubrication failure due to high temperature.
(2) Improve product performance: The improvement of lubrication can reduce the temperature of steel wire, which is beneficial to improve the toughness of the product. Due to the reduction of friction and the difference in stress state during deformation, the yield strength of the product can be slightly increased.
(3) Increase the drawing speed: If the cooling capacity of the wire drawing equipment, the potential of the lubricating material and the mold have been fully utilized, and the motor capacity is still sufficient, good lubrication can reduce the load on the cooling system of the equipment and better ensure the surface quality. Pressure lubrication can continue to increase the drawing speed. It is especially obvious for the non-pickling and phosphating technology. In the absence of good lubrication technology, the drawing speed of the non-pickling and phosphating treatment is very low. In some enterprises in Europe that have adopted pressure lubrication, the normal speed of drawing steel wires for mattresses is above 12 m/s.