Precautions For Height Injection Of Outboard Motors

Mar 13, 2023|

What are the things that need to be paid attention to when the outboard motor is processed with height injection? If you are not sure, let’s take a look at what the relevant person from the outboard motor manufacturer said.
1. When starting the engine of the four-stroke water-cooled outboard engine, the four-stroke engine oil must be filled first, and it is forbidden to start the machine without adding or not adding oil.
2. The two-stroke water-cooled outboard engine should be used in strict accordance with the instructions. The specified two-stroke engine oil and No. 92 gasoline should be mixed and used in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, and gear oil to start the engine of the two-stroke water-cooled outboard engine. The machine must be put into the water before it can be started (do not start the machine on the shore).
3. It is forbidden to run-in at idling speed in a water bucket. During the running-in period, it is forbidden to idle at a speed higher than five minutes. Long-term idling during the running-in period may produce carbon deposits, which may burn the spark plug, which may cause difficulty in starting later.

Send Inquiry